Maxliner is a leading cured-in-place pipe (CIPP) epoxy pipe lining system for small diameter pipes ranging from 2 to 10 inches in diameter and can negotiate 22 degree, 45 degree and even 90 degree bends. The system uses highly engineered equipment and materials to repair existing pipelines without digging, thereby saving homeowners not only the expensive costs associated with digging and reconstruction but can protect their landscaping, which can be ruined by the traditional dig and replace method. For more information please contact our crew in San Diego at Brinks Services today!
Maxliner offers a wide selection of liners, all of which are extremely flexible and designed to maneuver multiple bends and joints. Using styrene-free epoxy resin, Maxliner offers a quality lining system which can vary its thickness and has the integrity equal to that of a Schedule 35 plastic pipe or a Schedule 80 plastic pipe, in that it is designed to put a pipe within a pipe that will last at least as long as its 50 year minimum design life. The Maxliner System has received the NSF Standard 14 Certification and ICC Evaluation Service, Inc. (ICC-ES)- the country's leader in evaluating products for compliance with building codes- Complies with the 2009 International Plumbing Code and the 2009 International Residential Code. The Maxliner system offers the ability to reline lateral pipes providing the same benefits of the CIPP process and DOW TM formulated epoxies. Applications include laterals, verticals, roof drains, commercial drains and industrial drains. To learn more visit www.maxlinerusa.com .
The liner is tailored to the necessary length and both components (MaxPox® resin and curing agent) are mixed with RS ProfiMix.
The epoxy mixture is filled into the liner and evenly distributed with a calibration roller.
With the help of the LinerGun® (inversion device) the impregnated liner is installed in the damaged pipe by means of compressed air. The liner is kept under pressure with air until the epoxy mixture has completely cured. The curing may be accelerated with hot water or steam.
Where the liner has sealed inlets, it is possible to cut them open with the milling robot Cutter.
1. "Maxliner/This Old House" you can find it on the web, at YouTube
2. MaxLiner USA > The Maxliner Process Video
|> Hi-Res Windows Media (10,724 kb)
> Hi-Res .mpg (68,615 kb)
> Hi-Res QuickTime (17,741 kb)
> Mid-Res Windows Media (6,524 kb)
> Mid-Res .mpg (51,111 kb)
> Lo-Res Windows Media (3,370 kb)
> Lo-Res QuickTime (7,789 kb)